Manufacturer
PMK GmbH
Mess- und Kommunikationstechnik
Königsteiner Straße 98
D-65812 Bad Soden, Germany
Internet: www.pmk.de
Phone:
+49 (0) 6196 5927 - 930
E-Mail: sales@pmk.de
Fax:
+49 (0) 6196 5927 - 939
Warranty
PMK GmbH warrants this oscilloscope accessory for normal use and operation within specifications for a peri-
od of two (2) years from date of shipment and will repair or replace any defective product which was not dama-
ged by negligence, misuse, improper installation, accident or unauthorized repair or modification by the buyer.
This warranty is applicable only to defects due to material or workmanship. PMK GmbH disclaim any other
implied warranties of merchantability or fitness for a particular purpose. PMK GmbH will not be liable for any
indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business,
loss of use or data, interruption of business and the like), even if PMK GmbH has been advised of
the possibility of such damages arising from any defect or error in this manual or product.
Copyright © 2015 PMK GmbH
All rights reserved.
Information in this publication supersedes that in all previously published material. Specifications are subject to
change without notice.
A93-350-00X
Revision G - September 2015
PMK 3D Scope-Probe Positioner
Order-No.
Type
Description
893-350-001
MSA 100
PMK Probe-Positioner with steel base, span width 200 mm
(HAL512)
893-350-002
MSB 40
PMK Probe-Positioner with table clamp, span width 200 mm (HAL512)
893-350-003
MSC 85
PMK Probe-Positioner with vacuum clamp, span width 200 mm (HAL512)
893-350-004
MSM 130
PMK Probe-Positioner with magnet foot, span width 130 mm (HAL512)
893-350-005
MSM 200
PMK Probe-Positioner with magnet foot, span width 200 mm (HAL512)
893-350-006
MSU 1500
PMK Probe-Positioner with steel base, span width 200 mm
(UNIHOLD)
Accessories and Spares for 3D Probe-Positioners
Order-No. Typ
Description
893-100-001
STS 100
1200g heavy steel base, ø 100 mm, Positioner collet M6
893-100-002
TIK 40
Table clamp with a clamping range up to 40 mm for table edges and
pipes, 2 collets M6
893-100-003
VAS 85
Vacuum cup M8 incl. 1 x adapter to M6, ø 85 mm
893-100-004
TM 170
Magnet food 170 N M6 ø 30 mm
893-100-005
TM 300
Magnet food 300 N M8 incl. 1 x adapter to M6, ø 30 mm
893-200-130
STV 130
PMK 3D Probe Positioner, span length 130 mm, both sided M6
893-200-200
STV 200
PMK 3D Probe Positioner, span length 200 mm, both sided M6
893-050-000
HAL 512
Holder for PMK probes and other probing devices with ø 5-12 mm,M6
893-000-M86
GAD M86
Screw adapter M8/M6 SW 13 mm
893-090-000
UNIHOLD
PMK universal Probe Holder "Uniholder" for PMK Probes and other
Readings recorders with ø 1.5-17 mm, M6
