Installation
2) Drivers
•
In order for Motion Manager to communicate with the computer you
will need a driver for the UART communication port to the Motion
Manager Sensor Hardware.
•
In most cases the computer will automatically download the driver.
•
Ensure that the computer has Internet connectivity before connecting
the Motion Manager Sensor Hardware
•
Connect the Motion Manager Sensor Hardware
•
Plug the Motion Manager Sensor Hardware into a USB port on
the computer OR dock the computer in a dock equipped with the
Motion Manager Sensor Hardware
•
After the driver has finished loading, restart the computer. This will
properly start the PMT Motion Manager Controller.
•
If your computer doesn’t download the driver automatically, the driver
is also provided by PMT in 32 bit and 64 bit or it can be manually
downloaded at
http://www.ftdichip.com/Drivers/VCP.htm
