©
2018Pneumex, Inc. All rights reserved
12 . 8/27/2018
Remove the straps holding the PneuWalker™
to the pallet.
Put the handlebars in the forward position
to assist moving the PneuWalker™ off the pallet.
Locate the pin on the top of the handlebar where it connects
to the frame upright, pull out the pin and rotate the handle-
bar to the forward position, replace pin to hold handlebar.
Repeat on the other side.
Push or walk the unit to the edge of the pallet
using the handlebars.
Attach wheels
1. Lay PneuWalker™ unit gently on it’s side
2. Locate wheels in packing. There are two marked front
wheels and two marked back wheels
3.
Lock wheels
Wheels must be in locked position before screwing into
threaded holes on bottom of unit. Push down on black tab until wheel movement is locked.
Locked
Unlocked
Pull out pin.