14
MAINTENANCE
NOTE:
The information contained in this Manual is designed to assist you in the safe maintenance of the Stapler.
Some illustrations in this Manual may show details or attachments that differ from those on your own
Stapler.
MAINTENANCE AND INSPECTION
Read section titled "SAFETY" (page 4-7)
WARNING
•
Disconnect air hose and remove all Staples from
Stapler when:
1)
doing maintenance and inspection; and
2)
clearing a jam.
1) Inspecting the Magazine
•
DISCONNECT THE AIR HOSE
•
Clean the magazine. Remove dust or wooden chips
which may have accumulated in the magazine.
2) Storing
•
When not in use for an extended period, apply a thin
coat of the lubricant to the steel parts to avoid rust.
•
Do not store the Stapler in a cold weather environ-
ment. When not in use, the Stapler should be stored in
a warm and dry place.
•
Keep out of reach of children.
3) Warning Label
•
Change the WARNING LABEL if missing or damaged. A
new WARNING LABEL is available from a PNI Author-
ized Service Center.
4) Maintenance Chart (see page 15)
5) Operator Troubleshooting (see page 16)
CAUTION
Repair, modification and inspection of PNI Staplers must
be carried out by PNI or it's Authorized Service Center.
This Parts List will be helpful if presented with the Sta-
pler to the Hitachi Authorized Service Center when re-
questing repair or other maintenance. In the operation
and maintenance of power Staplers, the safety regula-
tions and standards prescribed in each country must be
observed.
MODIFICATIONS
Porta-Nails’ Tools are constantly being improved and
modified to incorporate the latest technological advance-
ments. Accordingly, some parts (i.e.: code numbers and/or
design) may be changed without prior notice.
SERVICE AND REPAIRS
WARNING
•
Only service personnel trained by PNI, distributor or
employer shall repair the Stapler.
•
Use only PNI parts supplied or recommended by
PNI for repair.
All quality Staplers will eventually require servicing or
replacement of parts because of wear from normal use.
In order to achieve the optimal performance of the 461A
Pneumatic Flooring Stapler preventative maintenance is
recommended.
NOTE:
Specifications are subject to change without any obliga-
tion on the part of PNI.
WARNING LABEL
