10
MAIN FETURES:
•
PNI CH2000 is easy to use and configure with a Windows PC and USB
port.
•
To avoid errors, lock time must be synchronized with PC’s time
•
Main functions: alarm, close door prompt, Do not disturb etc.
•
Reports exports as Excel files.
•
Two independent unlocking methods: card and mechanical key
•
Jimmying resistance, fake closing alarm and low voltage alarm
TECHNICAL SPECIFICATIONS:
•
Card type: MF1
•
Starting time : <1 sec.
•
Working Voltage: 6V (4 x AA alkaline battery)
•
Maximum power consumption: 200 mA
•
Working temperature: -2
6°C
~
6
0°C
•
Working humidity: ≤ 80%
•
Door thickness: 30 ~ 50mm
•
Unlock recording: save the newest 1000 piece of unclocking record
(including mechanical key unlocking)
•
Sensor distance: 0 - 5cm
•
Weight: 3.4 kg
•
Outdoor panel dimensions: 244 x 77 x 26mm
WARNING: In order to use CH2000 lock you need the card programmer
PNI FLH60 (CD software and RFID card included) and proximity cards
PNI EMC-05 13.56 MHz.
INSTALATION INSTRUCTIONS:
1. Hardware and software requirements:
PC with Widows OS
with at least one USB port and at least 1024 x 768 px
resolution.
2. Card Reader installation:
Connect the Card Reader wire with computer’s USB port, when Green LED
lights after two beeps, installation succeed.
Note: the card reader is not included.
