18
4. If the 12-hour time format has been
selected, “
A
” or “
P
” should flash, denoting
a.m. or p.m.. Press the
ADV
button to
toggle between a.m. and p.m., then press
the
ENT
button.
5. The first digit of the clock time should
flash.
6. Press the
ADV
button to change the
flashing digit. When the correct number
is viewed, press the
ENT
button to move
to the next digit of the clock.
7. Repeat step 6 to store the remaining
digits of the time. The digit flashing is
the digit being set.
8. The Corsa Digital Compass automatically
returns to clock mode after the time has
been set.
NOTE: If at any time during pro-
gramming no button is pressed for 30
seconds, the Corsa Digital Compass
exits out of programming mode.
CLOCK MODE