7
Backlight (model X473 only)
The Corsa model X473 Digital Compass uses
an electro-luminescent backlight to illuminate
the display, making it easily visible at night.
Pressing the
ADV
and
ENT
buttons at the
same time turns the backlight on or off.
The backlight has a programmable time-out,
which shuts the backlight off after it has
been on for a specified period of time. It is
recommended that the backlight be turned off
to conserve batteries when not being used.
Resetting the compass
Because the battery of the Corsa Digital Compass
is not easily removed, a manual reset has been
added to the Corsa Digital Compass. Resetting
the Corsa Digital Compass erases everything
that is stored in memory including calibration,
the time-outs, the clock, the timer, and the
stored bearing. Therefore, resetting the Corsa
Digital Compass should only be done when you
want to completely erase the memory.
To reset the Corsa Digital Compass
1. Press and hold the
ADV
and
ENT
buttons
at the same time for 10 seconds and
“
rESET
” should flash.
OVERVIEW
