User manual
10
En
gli
sh
displayed on the screen together with and
icons that will blink.
To deactivate
Dual Watch
, long press again the
P
[7] key.
Note: If a signal is received during the scanning process of the two channels,
the radio stops the scan and stays on the channel with signal. When the signal
disappears, the radio waits for another 5 seconds after which it resumes the
scanning process of the two channels. If the PTT button is pressed or another signal
is received within 5 seconds, scanning does not resume.
Note: As long as the Dual Watch function is active, all buttons will be locked
except the PTT, SQ, and P keys.
Menu
From the menu you can set the squelch level, the energy saving level or you
can activate or deactivate the key beep.
To access the menu, simultaneously press the keys
F
[3] and
▼
. The icon
will appear on the screen.
Once into the menu, use the
F
key [3] to navigate the menu and the keys
▼
and
▲
to change the settings.
To save a setting, press the key
F
[3] that will take you to the next menu
setting.
To exit the menu, press the
PTT
key.
Set the Squelch level
This function evaluates the signal-to-noise ratio (ie the ratio between useful
and interfering signals). Thus, only useful signals are sent to the speaker.
