8
9
Windshield Installation
– Power Cord Operation (use Bracket B)
1.
Adjust mounting bracket.
Bend the angle of the metal bars of the windshield bracket B to
set the best viewing and detection angle, ensuring the radar detector is level with the road.
2.
If suction cups are not installed in the bracket,
insert the nipples of the suction cups into
the windshield bracket.
3.
Secure to windshield.
Press the bracket firmly against the windshield until the suction cups
take hold securely.
4.
Mount the radar detector
onto the plastic piece at the end of the bracket. You will hear a
“click” when the two parts are properly connected.
5.
Power-up.
Plug the small end of the coiled power cord into the power jack on the side of
the radar detector. Plug the large end of the power cord into the power socket of your
vehicle.
INSTALLATION
Summary of Contents for SENSORO SILVER BULLET RX7600
Page 30: ...NOTES...
