background image

14

15

Battery Life

The SILVER BULLET RX7500 can provide approximately 30-40 hours of battery life from two AA alkaline 

batteries. Battery life is affected by many variables, such as the brand and condition of the batteries, the 

ambient temperature, the number and strength of engaged signals, and the duration of reported alerts, 

backlight, and user settings. The estimated battery life provided here is based on battery aging tests 

conducted in laboratory environments.

Low Battery Indicator

A “LOW BATTERY” message will appear when 2 to 4 hours of battery life remain. This message will scroll 

across the screen for 10 seconds accompanied by a beeping sound. This will repeat every 30 minutes until 

no battery power remains and the radar detector shuts off.

 We suggest keeping the power cord readily available. If your batteries are drained, the cord 

will allow you to continue using your radar detector until you can replace the batteries.

 

Auto Power-Off 

To conserve battery power, the SILVER BULLET RX7500 will automatically shut off when no signal detection 

and no button manipulation have occurred for 40 minutes. The radar detector will display ”ENTERING 

SLEEP MODE… PRESS ANY BUTTON TO STAY ON” and will beep for 20 seconds before powering down. To 

keep the radar detector on, just press any button while the audio and visual warnings are displayed.

 

The automatic power-off does not function when the radar detector is operated by power cord.

 Please turn off the radar detector whenever you leave your vehicle. Even a weak signal can 

cause it to remain on and drain your batteries.

 If the radar detector was turned off automatically, you can turn it back on by pressing any 

button, or by moving the power switch to OFF and then to ON. 

OPERATION DETAILS

Summary of Contents for SILVER BULLET RX7500

























Reviews: