background image

15

When do I need to calibrate the compass?

The Wayfinder V700 needs to be calibrated 

when  used  for  the  first  time, when  used  in 

an  environment  with  a  different  magnetic 

field, or  when  the  batteries  are  removed  or 

replaced.  Using  the  Wayfinder  V700  in  a 

different environment includes moving it to a 

new position in the same vehicle, installing it 

in a different vehicle, or when there has been 

a change to your vehicle such as installation 

of new electrical equipment such as a stereo 

or  CD. The Wayfinder V700  must  be  hand 

calibrated  (see  page  11)  before  first  use 

outside the vehicle.

What are the benefits of Vehicle Mode and 

Hand Mode?

The Wayfinder V700 includes an additional 

electronic  sensor  which  allows  it  to  store 

two  calibration  settings:  one  for  use  when 

the unit is mounted vertically in its bracket 

(vehicle mode), the other for use outside the 

vehicle in a horizontal position (hand mode). 

This  allows  you  to  use  the  compass  in  two 

different  magnetic  fields  (inside  or  outside 

the  vehicle)  without  needing  to  recalibrate 

each time you change environments.

FREQUENTLY ASKED QUESTIONS

Summary of Contents for Wayfinder V700

























Reviews:

Related manuals for Wayfinder V700