Pocket home PH-BP1-V, Owner'S Manual

PROG  FUNCTION program setting     

- Push the 

Fce

 button and choose the PROG 

(PROGRAMMING)

 function with the 

  button; 

  confi rm with the 

i

  button.

- With the 

  button, choose the date which you want to program acc. to the table

- After selection, push the 

i

 button, and the 1:U1 message appears on the display to set the 

  fi rst time period.
- With the 

 button, set the time of the fi rst change (min. step of 10 min.).

- Repeatedly pushing the 

P

 button, assign the required temperature to this time.

- Confi rm with 

i

 button again; the display automatically shows 1:U2 message for the second 

  interval of the 1

st

 day.

- Repeat the procedure until you set all time intervals (max. 6), and then exit the programming 
  mode with the 

Fce

 button.

- Choose the AUTO function and the thermostat starts working 
  according to the preset program.

d:1 Monday

d:5 Friday

d1:5 Monday to Friday

d:2 Tuesday

d:6 Saturday

d6:7 Saturday to Sunday

d:3 Wednesday

d:7 Sunday

d1:7 all week

d:4 Thursday

TABLE FOR SELECTION OF PROGRAMMED DAYS

Thermostat state indication:

AUTO (or MANU) message on the display is LIT = connected device switched ON 
AUTO (or MANU) message on the display is FLASHING = connected device switched OFF  

OTHER FUNCTIONS

Short-term temperature change in the AUTO mode

Push the 

 button in the AUTO mode; thus you can change the required temperature for a short time; the 

thermostat maintains this temperature until the next temperature change given by the program (in the PocketHome

®

system, the so-called 

INDEPENDENT MODE

 can also be assigned; for more, see the central unit manual).

OF:F  FUNCTION permanently off

Push the 

Fce

 button and choose the OF:F function with the 

  button; confi rm with the 

i

button. Thus the thermostat is permanently switched off. In this mode, the OF:F message and 
current temperature/time value alternate on the display. To cancel this function, push the 

Fce

button and choose another mode with the 

 button.

“ LO:C” FUNCTION child lock

Used for locking the keyboard, protection against undesirable handling.
Push the 

Fce

 button, then simultaneously  

P

  and         the keyboard is locked 

(buttons - 

functionless)

. The LOC 

(LOCK) message appears on the display shortly

. To cancel, that means 

unlock, push the 

P

  and       buttons simultaneously.

6