background image

Pb

LEAD FREE

in compliance with RoHS

ELEKTROBOCK CZ s.r.o.

Blanenská 1763
Kuřim 664 34
Tel.: +420 541 230 216

The guarantee period is 2 years. In the case of gua-
rantee or post-guarantee service, send the product 
to the manufacturer’s address.

MADE IN CZECH REPUBLIC

DECLARATION OF CONFORMITY

We, ELEKTROBOCK CZ s.r.o., herewith declare that the pro-
duct PH-BP1-V is in conformity with basic requirements and 
other corresponding provisions of the directive 1999/5/EC.
Kurim 1.8.2009                                         on www.elbock.cz

In the PocketHome

®

 system, the transmitter detects current room temperature, receives information on 

the required temperature from the central unit, and sends requirements to the receiver according to the 
temperature difference. In connection with up to 9 PH-BP1-V transmitters, PH-BP1-P9 means a system 
for complete control of fl oor heating.

Technical parameters

Power supply

2 x 1.5 V alkl. baterie type AA 

Communication type

two-way

Frequency

433.92 MHz

HF output

< 10 mW

Number of temp.changes 6 na každý den 
Hysteresis

0.1°C to 5°C by steps of 0.1°C

Min. program. time

10 minutes

Preset temperature range 3°C to +40°C
Temperature setting

by 0.5°C

Min. indication step

0.1°C

Measurement accuracy

± 0.5°C 

Protection class

IP20

Working temperature

0°C to +40°C

CERTIFICATE OF GUARANTEE

(guarantee period for the product amounts to 2 years)

product No.:

date of sale:

stamp of shop:

examined by:

Advantages:

- In the PocketHome

®

 system, central control 

  from one point, quick overview of temperature 
  in every room.
- Temperature control in every room.
- By request, the receiver controls the distributor 
  thermo-valves and pump.
- The system is also able to work in autonomous 
  mode without the central unit.
- The E-EPROM memory keeps the codes even 
  in the case of power failure.
- Up to 30% energy saving.

up to
9 thermostats

www.elbock.cz

Summary of Contents for PH-BP1-V









Reviews: