INSTALLATION
The device can only be installed by a person with adequate
qualification! The installation must be executed in
a voltage-free state!
Wiring diagram:
230 V/ 50 Hz
L
N
max.
16 A
L N
FUNCTION BUTTON ( R ) :
SHORT PRESSING
(for
about1,5s)
-
coding.
LONG PRESSING (for about 5s)
-
RESET deleting the code from
the memory (the green and red
LEDs flash simultaneously).
PH-SP1 is used for switching the heating device in connection
with the PH-BSP control unit.
The big advantage is mounted
directly into the
installation box.
ph_sp1_en:Layout 1 18.3.2011 13:18 Page 2
