Connecting the Air Supply
Note, a video of connecting the air supply can be viewed here:
https://www.youtube.com/watch?v=2H1Mnk9O__w
from 0:47 to 1:26
Below is an example of the air setup required to run the Pocket NC V2-50. Please note that the
source of air and inlet hose may differ. The user will need to supply and install the appropriate
adapter into the ¼” BSPT port on the inlet side of the filter in order to hook up the desired air
hose. Note the machine comes with the air regulator and filter (the tan colored piece of
equipment hanging on the pegboard in the photo below) as well as all black tubing. The
machine does not come with the red tubing or the air compressor shown on the left of the photo,
the user will need to supply input tubing and air supply.
9
