-
7
-
7.
EXTENDED FEATURES
7.1 LEAVING MEMO MESSAGES
Press the MEMO button until “ oo “ appears in the display and the unit beeps. As you leave
your message, the display will count the number of seconds which have elapsed. The
message length will not exceed 60 seconds.
Pressing STOP will cause the ANSWER MACHINE to stop recording.
7.2 RETRIEVING YOUR MESSAGES / MEMO
When a message has been left, both the red LED in the display and the ON / OFF LED will
flash. The display will indicate how many messages have been left.
To play, press the
>
. If more than one message is recorded then pressing >> will start the
next message & pressing << will play the last message again.
7.3 CALL MONITORING
The incoming call will be heard through the loud speaker of the ANSWER MACHINE.
Without lifting the handset pressing STOP will terminate an unwanted or nuisance call. To
speak to the caller, lift the handset of the telephone. If the ANSWER MACHINE continues
to record, press the STOP key on the ANSWER MACHINE.
7.4 DELETING MESSAGES & MEMORY FULL
To delete a single message, press the delete key whilst the message is in the process of
playing. Delete all messages by pressing and holding delete key for about 2 seconds.
If “ Fu ” is showing in the display, you will need to delete some or all of the messages as the
14 minutes record time is full.
7.5 CHANGING THE SECURITY CODE
Your security code will default to 159 if the ANSWER MACHINE looses power and the
batteries are removed or become flat. The security code must never be changed to 999 or
112 as these are used by the emergency services.
To change your security code, press and hold ON/OFF key until three horizontal bars
appear on the left of the display with the first digit of the security code in the right side of the
display. The display will scroll the present code then after the long beep, press the >> or <<
keys to increase or decrease the first digit of the security code. Press the ON / OFF key to
change to the second digit. Carry out the above procedure to change the three digit security
code.
AN200A.ISS1.03.10.00