Getting Started
19
3.
To set up connection with a hidden network, open
Connection to a hidden network
and enter its SSID from
the on-screen keyboard in the
Network name (SSID)
field.
4.
Select security type in the corresponding list:
•
None
– for an open network
•
Simple (WEP)
– after you select this option, you
will need to specify
WEP
Authentication type
–
Open
System
or
Shared Key
either. The Device cannot rec-
ognize authentication type automatically
•
WPA/WPA2 Enterprise
– you will need to spec-
ify username, password and domain (if necessary)
•
WPA/WPA2 PSK
– you will need to enter net-
work key (up to 64 symbols)
5.
Open
Advanced settings
. Select the idle time be-
fore disconnection in the corresponding section
6.
If it is needed to configure network settings manually,
go to
Advanced settings
, and change
IP address configuration
:
•
DHCP
— get IS address automatically (if DHCS
server is configured)
