GETTING STARTED
16
INSERTING MICRO SD CARD
The Device already has 16 GB of internal storage, but you can extend it
up to 2 TB by using micro SD card.
Insert it to the slot, like
it shown on a figure, and
slightly push until card will
be fixed.
To eject the card, slightly
press on its edge until it will
be unfixed, and pull it to get.
ATTENTION!
Before ejecting microSD card either turn the Device off or unmount
it: go to
Settings > Storage settings > Unmount SD card
. Otherwise the data stored on
microSD card might be damaged.
Sim slot
SD card slot
MOBILE NETWORKS CONNECTION
The Device supports GSM and/or WCDMA mobile networks connection
for Internet access.
ATTENTION!
The Device utilizes some services, which don’t ask user’s permission
for Internet access (for example, synchronization). Consult with your mobile operator
about traffic rates.
At first, you need to install your network operator SIM-card, as it is shown
on the figure, and restart device. In case if the card is protected with
PIN-code, the Device will ask you to enter it from on-screen keyboard.
PIN-code request settings can be changed in
Settings > Security > SIM card
lock > Set up SIM card lock
. In this section you can set whether request or
not PIN-code when you are unlocking the screen, also you can change
the SIM-card PIN-code.