GETTING STARTED
17
NOTE
In case when Lock SIM card parameter is on, you will be asked for PIN every
time when you’re unlocking the screen.
Usually mobile network operators pre-configure connection settings
(such as APN) on a SIM-card, so the Device will connect to the network
automatically.
ATTENTION!
If the Device is connected to Wi-Fi network, it will have higher priority
for data transfer.
If you need to change connection configuration, go to
Settings > Wireless
& networks > More > Mobile networks
.
•
Data connection
– turn mobile network connection on or off
•
Data roaming
– select whether use mobile network connection or not
when you are out of your mobile operator coverage, for example, abroad
•
Prefferred networks
•
Network mode
– select the most suitable one for your mobile network
or set to auto-detect
•
Access Point Name
– Internet access points configuration. If you need
to set up one more point, open the section’s menu by
Menu
hardware key
press and set the parameters provided by your mobile operator
•
Network operators
– select network operator to connect to. Press
Select
automatically
to connect to the default network.
After pressing
Select manually
, the Device will search for available mobile
networks and you will be able to select one. For example, this feature
could be useful when you are in roaming zone – you will be able to select
operator with the lowest rates.
NOTE
Consult your mobile network operator about roaming rates.
