PG-2092P USER MANUAL VER:1.0 4 OF 11
For more of the message content
Duplicate message
Function icons
Setting time/Setting auto turning-off
Setting audio
Setting mute / vibration mode
Setting alarm
Deleting all unlocked messages which have been read
Miscellaneous icons
Low battery warning
Out of range indicator
3.
Turning on the pager
The pager responds by audio alert after inserted a battery in it, press
Read / Exit Key
,
the initial time and date will appear on the LCD.
Initial display of the pager:
Display of standby mode while the pager is in audio alert mode:
Display of standby mode while the pager is in vibration alert mode:
The pager is now in standby mode and ready to receive messages.
Display when pager is turned-off:
You can press
Function Key
twice or thrice to come into “OFF?” function and then press
Setting / Selection Key
to turn off the pager.
You can hold
Read / Exit Key
for approximately 2 seconds to turn on the pager again if
it is in turned-off state.
4.
Functions
In standby mode, you can press
Function Key
to come into the corresponding function
menu, and then press
Setting / Selection Key
to confirm and exit.
Note:
If you want to exit a function selection without any change, press
Read / Exit Key
.
