Avoid excess liquid
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
72
73
• Check that batteries are installed
properly and meter power works by
pressing the
M
button on the side
of meter.
• Replace the battery door by aligning
the tab on the bottom of the battery
door with the slot on the meter back
and slide downward to lock into place.
• When cleaning and disinfecting, take
care not to get liquid into battery
compartment.
Replace Battery Door
NOTE:
Be sure to set the correct time and date on your meter
before testing
(see Setting Up Your Meter on page 55)
.
Storage and Handling
• Store POGO at room temperature
between 40°F – 86°F and within a
relative humidity range of 10%– 90%
(non-condensing).
• For best results, use POGO between
50°F – 104°F (operating temperature).
• If the temperature icon appears on your
POGO Meter screen, allow meter and
cartridges to adjust to the operating
temperature range before testing.
• Use POGO System in a relative humidity
range of 10%– 90% (non-condensing).
• Meter temperature is out of range
Cold
Hot
Out of temperature
range symbols
C
A
R
IN
G
F
O
R
YO
U
R
POG
O
C
A
R
IN
G
F
O
R
YO
U
R
POG
O
