Functions
Power On/Off
To Power On:
Press and hold the power button (21) for 2 seconds. The device will
power on and enter into preview mode.
To Power Off:
Press and hold the power button (21) for 2 seconds and the device will
power off.
Power On and Auto Record
Press and hold the Record Button (15) for 3 seconds. IRIS CAM will automatically turn on
and begin recording.
Resetting the Device
If the device fails to power on or off or is not functioning properly, users can use the reset
switch located under the HDMI port. This can be done by pressing the button with a thin
object, such as a paper clip. Caution must be taken as materials broken off in the reset
switch opening can prevent button access.
Video Recording
Press the Record Button (15) to begin recording. The camera icon in the upper left of the
LCD screen will turn red. Additionally, the LED around the record button will turn red.
The evidence will be saved to the internal memory as .MP4 files. To stop recording press
and hold the Record button for 3 seconds. The up and down buttons can be used to zoom
in and out.
Voice Recording
Press the Audio Record (11) button to start voice recording. To stop recording, press the
Audio Record (11) Button again. Your Audio files will be saved as .WAV files.
Summary of Contents for IRIS CAM
