CelloTrack LTE Plus Overview
CelloTrack LTE Plus Overview.docx Page 8 of 39
Copyright © 2019 by Pointer Telocation, Ltd.
2
The CelloTrack LTE Plus Overview
2.1
Overview
Cellocator's CelloTrack LTE Plus is designed for advanced asset tracking and asset
management applications, and provides enhanced functionality, ease of installation
and support for a wide range of applications: target applications include inventory
management throughout short/mid-term Track & Trace, shipment and distribution
management, security (anti-theft), protection (anti-vandal, break-in detection) and
more.
The capabilities provided by the CelloTrack LTE can greatly reduce an enterprise's
financial losses incurred as a result of the often-difficult task of successfully tracking
and remotely managing the location, usage profile and security aspects of unpowered
but mobile transportation equipment. This equipment includes trailers, containers,
train wagons or any kind of valuable mobile asset such as electricity generators, heavy
machinery, chemical toilets and waste containers.
The CelloTrack LTE unit can interface via a short-range RF link to multiple MultiSense
devices, which acts as a Wireless Sensors Network (WSN). Read more about
MultiSense devices in the MultiSense and MultiSense-TH section.
The unit includes a 6 pin connector for programming, covered by a rubber cover for
dust and water protection (IP67).
The unit also provides a durable and long-life solution that supports up to 20 months
of continuous operation (single GNSS readings and Cellular transmissions per day).
The unit supports the required network standards for NA and supports all the major
service providers and their affiliates, such as AT&T, T-Mobile, Telus and Rogers.
Based on Cello and CelloTrack technologies, the CelloTrack LTE supports similar
tracking, communication, GNSS location-based features and maintenance capabilities
as per those available in the Cello and CelloTrack families.
Other CelloTrack LTE Plus features include:
Stand-alone tracking device; it can be installed and operated for long periods
without a power supply.
Houses all components in the same enclosure, including battery, GNSS positioning
engine, Cellular modem and antennas.
Highly rugged durable IP67 weatherproof casing for outdoor long-life service.
Long operation time (up to 20 months @ 1 transmission / day) via 5.3 Ah
rechargeable Lithium Polymer battery.
Purpose-built for minimum idle current consumption during hibernation.
Supports NA LTE network with user equipment category CAT 1.
Scalable Cellular communication technology; it can support any cellular network
supported by the Cinterion modem family.
CSR SiRFstarV™ based GPS and GLONSS positioning engine for reduced acquisition
time and better accuracy.
Supports a Wireless Sensor Network and up to 16 MultiSense devices.
Two fully configurable general purpose I/O ports: Digital, Analog or Pulse Counter
inputs or Open Collector outputs.
A 3D accelerometer that detects crashes (accidents), movement and vibrations of
assets and enables different transmission rates for a moving asset and a standing
asset.
