background image

 

 

 

OPERATING INSTRUCTIONS 

Ergonomic workplaces 

 

Products: Workbenches 

ERGO workbench adjustable in steps, ERGO workbench adjustable via a crank, 

electrically adjustable ERGO workbench 400 kg, electrically adjustable ERGO workbench 240 kg; mobile frames 

 

ERGO1, ERGO2, ERGO3; auxiliary table; accessories for the ergonomic workplaces program 

 

SAFETY NOTICES 

 

 

Risk of electric shock

 

The products contain or may contain electric components. 
Before installation, check that the supply cable and inlet are not damaged. 
When connecting the plug to the mains and handling the inlet, you should always have 
dry hands. 

 
Risk of burn

 

Some parts may become hot,  
you must pay special attention. 
Do not expose to heat radiation sources. 

 

 

 

It is absolutely necessary to read these instructions

;

 follow the instructions and recommendations 

below. Non-observance of principles of safe use may result in damage to the product, surrounding 
property, electric shock, fire or death. 

 

Familiarise yourself with the given product, its control and operation, elements of the product and 
potential risks related to its incorrect use. 

 

Ensure that every product user is carefully familiarized with the control, operation, and elements of this 
product and potential risks resulting from its use. 

 

Always heed safety instructions indicated on the labels. Do not remove or damage these labels. 

 

Keep control elements clean, legible, dry and free of oil and fat. 

 

Do not use the product for other than the intended purpose. 

 

Any modifications to electric components of height-adjustable workbenches are forbidden. DO NOT USE 
them if you find a bend, crack or other damage. 

 

Never carry out maintenance of electric components under voltage. 

 

If an unusual sound or another unusual phenomenon occurs, stop using the equipment. 

 

Provide for correct maintenance of the supply. Before use, check whether the extension cord has been 
damaged. 

 

For maintenance and repairs, use original spare parts only. 

 

Use of additional devices or equipment not recommended by the supplier may result in injury. 

 

Do not overstrain yourself, always use both hands or ask another person for help.  

 

Do not work with the equipment under the influence of alcohol or addictive substances. 

 

If you suffer from giddiness, infirmity or faintness, do not work with the equipment. 

 

Children must be under the supervision of an adult person. 

 

The products are not intended for mentally ill persons. 

 

 

Summary of Contents for ERGO 400

Page 1: ...ure that every product user is carefully familiarized with the control operation and elements of this product and potential risks resulting from its use Always heed safety instructions indicated on the labels Do not remove or damage these labels Keep control elements clean legible dry and free of oil and fat Do not use the product for other than the intended purpose Any modifications to electric c...

Page 2: ...adequate humidity Products provided with the MULTIPLEX worktop must be located in an environment with relative air humidity of 55 with a tolerance of 5 during manufacture of a glued worktop wood is dried to 8 10 humidity which corresponds to a relative air humidity of 55 Its operation outside the specified air humidity range causes deformation with subsequent loss of the guarantee Do not use the p...

Page 3: ...they cannot start moving spontaneously Do not exceed the maximum permissible loads of auxiliary tables or their parts For further specific information see the online virtual consultancy of POLAK SMART FURNITURE www smfu eu Weights of individual products and capacities of loading areas are indicated in the current workshop furniture catalogue which can be found at www polakcz cz Do not overload any...

Page 4: ...t service life it is necessary to observe the legislation in force for disposal of the created waste The product consists of parts which can be recycled eparately after sorting Guarantee conditions The operator is obliged to follow the instructions for use indicated in this document Their non observance is regarded as infringement of the guarantee conditions The guarantee does not apply to parts s...

Reviews: