background image

Technical specification and user manual                                                                                        PP-170  (S-018)           

4/7 

 

III. Operation and maintenance 

The hurdle is ready for use immediately after delivery.  
The height adjustment is done as follows: 
 

a)

 

while holding the telescope tubes press the 

spring-loaded buttons simultaneously, 

b)

 

slide the telescopes down or up to adjust the 

height until the buttons click, 

 

 

c)

 

next the hurdle toppling force should be 

adjusted accordingly, so pull and hold the knob 

in the hurdle foot, 

 

d)

 

then slide the counterweight to the 

corresponding height according to the label, 
then release the knob, do the same with the 

other hurdle foot. 

 

 

 
During idle periods the hurdles must be stored in a roofed dry place. For optimal performance they should be stored 
and transported on Polanik hurdle carts: HC-23 and HC-34. After every athletics season the hurdles must be cleaned 
from sand (mud, dust and etc). 
 

Even the best technical solutions cannot substitute for common sense. The usage of the product must take place 

under the supervision of qualified coaches. The producer shall not be liable for any incidents caused by its misuse. 

 
 
 
 

Summary of Contents for PP-170








Reviews: