Technical specification and instruction manual PP-174/7 PP-174 PP-175 PP-185 PP-185/4
4/7
III. Parts list (part sets)
The hurdle is delivered in parts and one complete hurdle contains:
Item
Part/set description
Q-ty
pcs
Sketch
1
Hurdle frame
1
2
Hurdle foot
2
3
Washer
2
4
Foot screw
2
IV. Assembly
Foot screws (item 4) with washers (item 3) are temporarily screwed into hurdle feet for transport (or they can be
found in a separate box when big quantities of the hurdles are delivered). A metric wrench no. 13 is needed to
perform the assembly. Although one person can prepare the hurdle for use, a convenient and fast assembly process
requires two persons.
To assemble the hurdle please do the following:
a) slide carefully one hurdle foot (item 2) into
one socket of the frame (item 1),
b) make sure the foot (item 2) is properly
placed in the socket, if it is not straight, please
correct its position,
c) screw the foot (item 2) to the hurdle frame
(item 1) by means of the foot screw (item 4)
and the washer (item3),
d) install the other foot in the same way.
The main goal of the hurdle collapsible construction is to assure easy and cheap transport. Please note that once you
screw the feet down, the hurdle is practically non-dismountable. Therefore we do not recommend unscrewing the
hurdle feet during idle periods. Removing the feet without proper tools can cause serious hurdle damages.
