Technical specification/Assembly manual
T-12268-D
7/10
III. Packing and transport
The dimensions* of the vacuumed packed landing area segments:
Segment no.
Description
Weight [kg]
length
[m]
width [m] height [m]
01
pole vault box surrounding pad left
2,30
1,00
0,80
02
pole vault box surrounding pad right
2,30
1,00
0,80
03
Wedge panel
2,30
2,00
0,80
04
Wedge panel
2,30
2,00
0,80
05
Main segment
2,40
2,00
0,80
06
Main segment
2,40
2,00
0,80
07
Main segment
2,40
2,00
0,80
08
Main segment
2,40
2,00
0,80
09
Main segment
2,40
2,00
0,80
10
Main segment
2,40
2,00
0,80
11
Front panel
1,40
2,40
0,30
12
Front panel
1,40
2,40
0,30
13
Side panel
2,30
0,4
0,80
14
Side panel
2,30
0,4
0,80
23
Top spike resistant pad
12,20
6,00
0,07
Volume [m
3
]
52,384
Gross weight [kg]
950
*Please note that the dimensions can differ from the above table in the range of +/- 7%.
IV. Preparing for first use
The landing area segments are vacuum packed only for transport. Please unpack them immediately after
delivery and leave them in a roofed place for few hours, so that they can return to their original shapes.
Storing
vacuum packed landing area segments may cause permanent damages in their internal structures.
When the
landing area elements return to their original dimensions, you can place them in a pole vault field. The field
surface should be even, smooth and without any obstacles. If you use the landing area outdoors, you should
also provide: a special waterproof cover P-12268-D to protect the landing area against unfavorable weather
conditions and a modular platform ST-12,2x6 to insulate the landing area from the ground.
