Instruction manual/technical specification
W-647
5/6
using the jacquard webbing belts and
self-locking buckles located on the
segment sides fasten the segments to
each other,,
place the top pad on the landing area
main segments,,
then fasten the top pad to the main
segments using D-rings
now the landing area is ready for use.
V. Operating
Stepping on the landing area and practising require special footwear designed for those purposes. Treading on the
landing area in footwear with spikes is only allowed when the landing area is equipped with special spike resistant
surface. Stepping on the landing areas in hard footwear or in shoes with heels is strongly prohibited. You must not
put any tables, chairs, benches or any other objects whose unit pressure exceeds 1kg/1cm
2
on the landing area. If
the landing area is moved from one place to another very often, it is recommended that a landing area cart should
be used.
VI. Maintenance
Due to the hygiene requirements it is recommended that the landing area should be cleaned regularly with
commonly available detergents. Before you start wiping the landing area, please try to clean a small spot on its
bottom side in order to check the reaction with the PVC fabric.
VII. Storing
The landing area segments can be stored only in a horizontal position. They cannot be bent or pressed by any objects
during storing. That may deform the segments permanently. A storing facility should be clean and dry. It ought to
provide min. temperature 5º C.
