EVCO S.p.A.
Vcolor 869
| Installer manual ver. 1.0 | Code 144VC869E104
page 25 of 92
6.3
Selecting the operating mode
All the operating functions can be accessed from the Home screen by selecting the specific area. According to the
selected machine type (see parameter E13), the Home screen menu will differ as detailed in the following table.
Blast chiller
Multifunction machine
Makes it possible to select a cabinet pre-cooling cycle, see
chapter 10.
In the Blast Chilling
mode, these functions
can be accessed
through the area
Enables the blast chilling mode in which it is possible to
select/set a standard blast chilling/blast-freezing cycle, a
multineedle probe or multi-timer cycle, see chapter 7.
Enables special cycles in which it is possible to select one of the
special cycles available according to the configuration of the
machine, see chapter 8.
In the Bast Chilling
mode, these functions
can be accessed through
the area
Makes it possible to select a retarding proofing cycle, detailing
date and time for cycle end; see section 8.8.
Makes it possible to select a slow cooking cycle; see section 8.9.
Makes it possible to select a thawing cycle; see section 8.2.
Makes it possible to select a conservation cycle; see section 8.10
Makes it possible to access the recipe book mode, where pre-
saved recipes are available for selection; see chapter 9.
This area is displayed if an alarm is in progress.
Pressing this area enables the historical data stored during
operation to be seen. See sections 7.6.2 and 12.2.
