EVCO S.p.A.
Vcolor 869
| Installer manual ver. 1.0 | Code 144VC869E104
page 65 of 92
13.1.4
Downloading configuration parameter settings (controller ->
USB)
To download the settings of the configuration parameter, operate as follows:
1.
Make sure the device is in stand-by and no procedure is underway;
2.
Insert the USB flash drive into the USB port and wait until the menu is displayed;
3.
Touch “DOWNLOAD PARAMETERS”;
4.
When the upload is complete, remove the USB flash drive from the device USB port.
13.1.5
Downloading HACCP data (controller -> USB)
To download the HACCP data, operate as follows:
1.
Make sure the device is in stand-by and no procedure is underway;
2.
Insert the USB flash drive into the USB port and wait until the menu is displayed;
3.
Touch “DOWNLOAD HACCP DATA”;
4.
Select date and hour of start for historical data recording ;
5.
Touch
to confirm. A file named “haccp.csv” will be generated;
6.
When the download is complete, remove the USB flash drive from the device USB port.
If the language in use is not a Western alphabetic language, data are saved in English in the "haccp.csv" file.
