Install Stride Sensor Battery
Before using your stride sensor for the first
time, insert the battery (included in the product
package).
1.
Open the battery cover by turning it
counterclockwise to OPEN using a coin
(picture A1).
2.
Place the battery inside the cover with the
positive (+) side facing the cover (picture
A2). Make sure the sealing ring is in the
groove to ensure water resistance.
3.
Place the cover with the battery inside it
into the sensor.
4.
Press the cover in place and close it by
turning clockwise from OPEN to CLOSE
using a coin (picture A3).
To increase battery life, Polar Stride Sensor
Bluetooth
®
Smart has three different power
modes: Measuring, Stand By and Deep Sleep
mode. In Stand By mode, the sensor is visible
to the receiving device and a connection is
possible. When connected to the receiving
device, the sensor goes to Measuring mode.
When disconnected, the sensor returns to
Stand By mode. If the sensor is not touched
during the next couple of minutes, it goes to
Deep Sleep mode. The slightest movement will
make the sensor return to Stand By mode.
E N G L I S H
3
