1. SERVICE INFORMATION
1-8
Various handles are available for sockets. Use the
speed handle for fast operation. Flexible ratchet heads in
varying length allow the socket to be turned with varying
force and at odd angles. Extension bars allow the socket
setup to reach difficult areas. The ratchet is the most
versatile. It allows the user to install or remove the nut
without removing the socket.
Sockets combined with any number of drivers make them
undoubtedly the fastest. Safest and most convenient tool
for fastener removal and installation
Impact Drivers
An impact driver provides extra force for removing fasteners by converting the impact of a
hammer into a turning motion. This makes it possible to remove stubborn fasteners without
damaging them. Impact drivers and interchangeable bits (
Figure 10
) are available from most tool
suppliers.When using a socket with an impact driver. Make sure the socket is designed for impact
use. Refer to Socket Wrenches. Ratchets and handles
in this section.
WARNING:
Do not use hand sockets with air or impact tools
because they may shatter and cause injury.
Always wear eye protection when using impact
or air tools
Allen Wrenches
Use Allen or setscrew wrenches (
Figure 11
) on
fasteners with hexagonal recesses in the fastener
head. These wrenches are available in L-shaped bar.
Socket and T-handle types. A metric set is required
when working on most motorcycles. Allen bolts are
sometimes called socket bolts.
Torque Wrenches
Use a torque wrench with a socket, torque
adapter or similar extension to tighten a fastener to a
measured torque. Torque wrenches come in several
drive sizes (1/4, 3/8, 1/2 and 3/4) and have various
methods of reading the torque value. The drive size
indicates the size of the square drive that accepts the
socket, adapter or extension. Common methods of
reading the torque value are the deflecting beam, the
dial indicator and the audible click (
Figure 12
).
When choosing a torque wrench, consider the
torque range, drive size and accuracy. The torque specifications in this manual provide an indication
of the range required.
Summary of Contents for 1100 GKE OutLaw
