11. EFI SYSTEM OF SQR 472ENGINE
11-61
2.42. Idle speed step motor fault (fault code P0505)
Serial
number
Operation steps
Test
results
Next step
1
Connect the diagnosis instrument, the
ignition switch is in the "ON"
Next
step
Next
step
2
Dial the idle adjuster connector, electrical
idling regulator of A and D and the B and
C pins between the value at 20
℃
is 53 ±
5.3
Ω
were examined using a multimeter.
The replacement of the stepper
motor
Repair or replace the wire harness
3
Between the check idle adjuster connector
A, pin and the D ECU X1_19#, X1_20#
pin, idle adjuster connector B between pin
and ECU, C X1_35, X1_36# pin line is
open circuit, short circuit.
Diagnostic
aid
2.43. The system voltage fault (fault code P0560)
Serial
number
Operation steps
Test
results
Next step
1
Connect the diagnosis instrument, the
ignition switch is in the "OFF"
Next
step
Yes Next
step
2
using a multimeter to check whether the
battery voltage is about 12V
No Replace
the
battery
Yes
Repair or replace the wire harness
3
The 87# pin check ECU X1_67# and the
main relay the line between whether there
is open circuit or short circuit to ground,
the X1-22# pin and the ignition switch
power supply line is broken or between
the short circuit, X1_44, X1_63 and the
positive pole of the power supply line is
broken or on earth is short.
No Next
step
Yes Next
step
4
Start the engine, check engine charging
voltage in different speed range is
between 9-16V
No Changing
engine
Yes Diagnostic
aid
5
Check the engine wiring harness ground is
good
No
Repair or replace the wire harness
11
Summary of Contents for 1100 GKE OutLaw
