35
EN
[1].
Put the programmed remote control with 2 or 4 push-buttons on the picture showing a target.
Press remote control push-button 1 until the AUTOMATIC CLOSING indicator
starts flashing.
[2].
Press remote control push-button 1 once.
> MEMORY RESET indicator (RESET) is flashing.
[3].
Press remote control push-button 2 until all indicators light up. Release push-button 2.
> STATUS indicator
is flashing.
3
2
1
►
Removal of programmed settings and remote controls
The following settings can be removed: the gate path, activation of the automatic gate closing mode
and all programmed remote controls or radio transmitters.