CLUTCH
6.24
Harsh drive
clutch engage-
ment.
-Drive belt worn too narrow.
-Excessive belt/sheave clearance with new
belt.
-Replace belt.
-Perform belt/sheave clearance adjustment with shim wash-
ers beneath spider.
Drive belt turns
over
-Wrong belt for application.
-Clutch alignment out of spec.
-Engine mount broken or loose.
-Replace with correct belt.
-Adjust alignment offset.
-Inspect/adjust or replace.
PVT cover
overheating
(melting)
-Plugged air intake or outlet
-Belt slippage due to water, oil, grease,
etc., rubbing on cover
-Clutches or weight being applied to cover
while in operation
-High vs. low range
-Clear obstruction.
-Inspect system. Clean , repair or replace as necessary.
Seal PVT system ducts.
-Remove weight. Inform operator.
-Instruct operator on guidelines for operation in proper driving
range for different terrain as outlined in Owner’s Safety and
Maintenance Manual.
Water ingestion
-Cover seals or ducts leaking
-Operator error
-Find leak and repair as necessary.
-Instruct operator on guidelines for operation in wet terrain as
outlined in Owner’s Safety and Maintenance Manual.
Belt slippage
-Belt worn out
-Water ingestion
-Belt contaminated with oil or grease
-Replace belt.
-Inspect and seal PVT system.
-Inspect and clean.
Belt burnt, thin
spots
-Abuse (continued throttle application when
vehicle is stationary, excess load)
-Dragging brake
-Slow, easy clutch engagement
-Caution operator to operate machine within guidelines.
-Vehicle operated with park brake on. Inspect brake system.
-Fast, effective use of throttle for efficient engagement.
PVT noise
-Belt worn or separated, thin spots, loose
belt
-Broken or worn clutch components, cover
hitting clutches
-Replace belt.
-Inspect and repair as necessary.
Engagement
erratic or stabby
-Thin spots on belt, worn belt
-Drive clutch bushings stick
-Replace belt. Refer to belt burnt troubleshooting and instruct
operator.
-Inspect and repair clutches.
PartShark.com
877-999-5686
Summary of Contents for 2009 Trail Blazer 330
