BRAKES
9.15
3.
Lubricate the mounting bracket pins with Polaris
Premium All Season Grease, and install the
rubber dust seal boots.
Polaris Premium All Season Grease
(PN 2871423)
4.
Compress the mounting bracket and make sure
the dust seals are fully seated. Install the pads.
Clean the disc and pads with brake parts cleaner
or denatured alcohol to remove any dirt, oil or
grease.
FRONT CALIPER
INSTALLATION
1.
Install caliper on hub strut, and torque mounting
bolts.
18 ft. lbs.
(25 Nm)
15 ft. lbs.
(21 Nm)
Front Caliper Mounting Bolt Torque
18 ft. lbs. (25 Nm)
Brake Line Torque
Banjo Style: 15 ft. lbs. (21 Nm)
2.
Install brake line and tighten securely with a line
wrench. Torque the brake lines to the proper
torque of 15 ft.lbs. (21 Nm).
3.
Install the adjuster screw and turn until stationary
pad contacts disc, then back off 1/2 turn.
4.
Follow brake bleeding procedure outlined in this
chapter.
5.
Install
wheels
and
torque
wheel
nuts
to
specification.
Front Wheel Nut Torque
27 ft. lbs. (37 Nm).
PartShark.com
877-999-5686
Summary of Contents for 2009 Trail Blazer 330
