Instr 9928521
Rev 01 2017-07
Page 8 of 8
g. Connect speaker harnesses to splitter
harnesses:
i.
Connector 10A on WHITE wire speaker
harness
a
to connector 9C on WHITE wire
splitter harness
o
.
ii. Connector 10A on GRAY wire speaker
harness
a
to connector 9C on GRAY wire
splitter harness
o
.
h. Coil and secure excess harness length in
upper dash compartment using cable ties
s
to
prevent contact with hot components, sharp
edges, or moving parts.
7. Reconnect black negative (-) cable to battery and
reinstall seat.
8. Restore access.
FEEDBACK FORM
A feedback form has been created for the installer to provide any comments, questions
or concerns about the installation instructions. The form is viewable on mobile devices
by scanning the QR code or by clicking
if viewing on a PC.
FEEDBACK FORM
