86
MAINTENANCE
Gearcases
Transmission (Main Gearcase)
Always check and change the fluid at the intervals outlined in the
Periodic Maintenance Chart beginning on page 75. Refer to the
Gearcase Specifications Chart on page 87 for recommended lubricants,
capacities and torque specifications.
Fluid Check
The fill plug is located on the
rear of the gearcase. Maintain the
fluid level at the bottom of the
fill plug hole.
1. Position the vehicle on a
level surface.
2. Remove the fill plug. Check
the fluid level.
3. Add the recommended fluid
to the bottom of the fill plug
hole. Do not overfill.
4. Reinstall the fill plug.
Torque to specification.
Fluid Change
The drain plug is located on the bottom of the gearcase between the rear
tires. Access the drain plug through the drain hole in the skid plate.
1. Remove the fill plug.
2. Place a drain pan under the drain plug. Remove the drain plug.
Allow the fluid to drain completely.
3. Clean the drain plug. Reinstall the drain plug with a new o-ring.
Torque to specification.
4. Add the recommended fluid to the bottom of the fill plug hole. Do
not overfill.
5. Reinstall the fill plug. Torque to specification.
6. Check for leaks. Discard used fluid properly.
Fill Plug
Drain Plug
(between rear tires)
