34
FEATURES AND CONTROLS
Electrical Switches
Engine Stop Switch (3)
- The engine will
not start or run when the switch is in the OFF
position. Its purpose is to provide the
operator with a quick means of engine
shutdown in case of an emergency. To stop
the engine, slide the stop switch either right
or left to the OFF position.
NOTE:
Turning off the engine stop switch will shut off all electrical
power to the vehicle, with the exception of the cooling fan on
some models. On those models, use the main switch to shut
off the power to the cooling fan.
Light Switches
The light switch is located on the
left handlebar (1). It’s used to turn
the lights on and off and to switch
the lights from HI to LO on models
equipped with HI/LO beams.
NOTE:
The lights won’t work unless the key is in the ON position
and the shut-off switch is in the RUN position.
WARNING
Operating the ATV on streets or roads, especially in darkness,
could result in an accident and serious injury or death.
Your ATV is not equipped with highway-approved lights. It’s
designed for and must be used for
off-road use only
. Use caution
and drive at reduced speeds in conditions of reduced visibility
such as fog, rain and darkness.
RUN
OFF
OFF
3
1
