background image

28

29

WARRANtY

liability for material defects does not cover normal wear occurring from the 
product’s intended purpose. Components in the motor and deceleration system as 
well as tires,  brake pads, chain, cassette, spokes and  all contact points of the rider 
with the pedelec are all subject to use-related wear, as is the battery.

The battery is subject to aging and is therefore also a wearable part. Please note that 
the battery gradually loses its capacity depending on its age and operating life. Take 
this into account when planning journeys and ensure that you switch to a new battery  
in good time. replacement batteries can be purchased from your Polaris ebikes 
authorized dealer.

see warranty card information included with your bicycle.

INsPECtIoN PLAN

You should service your bicycle on a regular basis. You can get more information 
about your bicycle’s parts, as well as cleaning and maintenance directions, in the 
instruction manual provided by the respective component manufacturers or on their 
websites.

To ensure that your bicycle remains in a safe condition and meets the conditions of 
the warranty, the following terms apply:

•  Clean your bicycle after every ride and check it for possible damage.
•  Have an authorized dealer carry out inspections according to the schedule 

provided in this manual.

•  Check that all screws and nuts are secure.
•  use a torque wrench to tighten screw joints.
•  Clean and grease moving parts (excluding brake surfaces) according to 

instructions from the manufacturer.

The first inspection is particularly important for ensuring that your bicycle remains 
safe and problem-free. Cables and spokes stretch, while bolted connections can 
loosen.

DEALER sERVICE sChEDULE

1st Inspection:

after approx. 125 miles

Work done:

_________________________

_________________________

_________________________

_________________________

_________________________

_________________________

_________________________

Materials used:

_________________________

_________________________

_________________________

_________________________

_________________________

_________________________

_________________________

Date:

 _____________________

signature:

_________________________

Dealer stamp:

2nd Inspection:

after approx. 600 miles

Work done:

_________________________

_________________________

_________________________

_________________________

_________________________

_________________________

_________________________

Materials used:

_________________________

_________________________

_________________________

_________________________

_________________________

_________________________

_________________________

Date:

 _____________________

signature:

_________________________

Dealer stamp:

Summary of Contents for DL818



















Reviews: