background image

8

9

sAFEtY

sAFEtY DEFINItIoNs

The following symbols, warnings and cautions are used throughout this manual:

WARNING: I

ndicates a potentially hazardous situation which could result in 

serious injury or death.

CAUtIoN: 

indicates a potentially hazardous situation which may result in 

minor or moderate injury, or is an alert against unsafe practices.

CAUtIoN

 (used without the safety alert symbol): indicates a situation which could 

result in serious damage to your bicycle and possible voiding of your warranty.

IMPoRtANt ELECtRIC BICYCLE sAFEtY INstRUCtIoNs

WARNING: to avoid serious injury or property damage: 

Polaris

®

 electric 

bicycles are intended only for on roaD use. all off road, stunt, or companion 

riding is not recommended and may void the warranty. 

IMPoRtANt NotE: 

it is especially important that you know and obey the 

local laws specifically pertaining to electric bicycles, which vary by state and 

county.

IMPoRtANt BAttERY AND ChARGER sAFEtY 

INstRUCtIoNs

WARNING: to avoid serious injury or property damage:

•  always turn off battery and turn off display before disconnecting battery 

•  batteries should be stored in ambient temperatures above 10°C.

•  never allow batteries to freeze (below 0°C) as this will result in permanent 

damage.

•  never take apart or modify the battery charger.

•  never dispose of batteries in fire. This could cause an explosion and/or fire.

•  never connect the battery charger to appliances other than your Polaris® 

bicycle.

CAUtIoN: to avoid possible injury or damage to your bicycle:

•  never attempt to open, disassemble or modify the battery charger. This could 

result in a fire or electric shock. There are no user-serviceable parts inside; 
and opening the battery charger will nullify your warranty.

•  always turn your system off before disconnecting the battery or plugging 

in the charger to recharge the battery. never turn the system on while the 
battery is charging.

•  Do not touch the charger with bare skin during charging. High temperatures 

may cause burns.

•  never cover the battery charger or place objects on top of it. This could result 

in a fire or electric shock.

•  Do not place the battery charger on uneven surfaces. Place the charger firmly 

on a flat, stable, dry surface.

•  Do not use the charger in high temperatures. overheating or fire may result.

•  only use the battery charger in a dry location. Do not place the charger in 

water or other liquids. Do not place or store the charger where it can fall or be 
pulled into a tub or sink. Do not clean the charger with a water spray or the 
like.

•  never rotate the pedals while your bicycle is charging. The cord may wrap 

around the pedal or crank, causing damage to the cord, which could result in 
electric shock or fire.

CAUtIoN: to avoid damage to your bicycle or charger:

•  only use the original battery charger supplied with your Polaris

®

 bicycle.

•  always charge batteries in a cool, well-ventilated area to avoid overheating. 

never charge batteries in direct sunlight.

•  Do not apply pressure to the power cable or the charger plug.

•  be sure to insert the charger plug securely into a functioning aC mains wall 

socket.

•  never touch the plug with wet hands.

•  keep the battery charger out of reach of children and pets.

•  Do not use a plug or socket that is dirty, wet or dusty. Clean the plug with a 

lint-free, dry cloth.

•  always remove the plug from the socket gently by the plug. never pull the 

cord.

•  Do not use this battery charger with an extension cord.

Summary of Contents for DL818



















Reviews: