14
15
TRANSPORT
The battery packs are subject to the Dangerous Goods legislation requirements.
Private users can transport battery packs by road without further requirements.
When being transported by commercial users or third parties (e.g. via air transport
or forwarding agency), special requirements on packaging and labelling must be
observed (e.g. aDr regulations). for preparation of the item being shipped, an
expert for hazardous material can be consulted as required. Dispatch battery packs
only when the housing is undamaged. Tape or mask off open contacts and pack
up the battery pack in such a manner that it cannot move around in the packaging.
Please also observe possibly more detailed national regulations. in case of
questions concerning transport of the battery packs, please refer to an authorised
bicycle dealer. bicycle dealers can also provide suitable transport packaging.
DISPOSAL
battery packs, accessories and packaging should be sorted for
environmental-friendly recycling. Do not dispose of the battery packs into
household waste!
D
efective or used battery packs/batteries, must be collected
separately and disposed of in an environmentally correct manner.
Please return battery packs that are no longer usable to an authorised
Polaris® ebike dealer.
INstALLING AND
REMoVING thE BAttERY
In-Frame Models
INstALLING:
1. Connect internal battery connector
located inside battery compartment,
to the battery and lock the connector
in place with the 2 metal prongs.
2. Gently place battery inside battery
compartment until the battery is
securely in the compartment.
3. seal and lock the battery in place
using the supplied key.
4. Turn on battery
5. Turn on display
REMoVING
:
1. a) Turn off display
b) Turn off battery
2. unlock the battery container with
the supplied key.
3. unlock the 2 metal prongs that
secure the battery connectors.
4. Disconnect battery from adaptor
located inside frame.
step 1
step 2
step 3
Installation:
