9
8
TUNER
LISTENING TO THE TUNER
To select one of the available tuner bands:
Press the Input source key [ ] to select input from each of the following in turn:
•
AM
•
FM
The applicable input source screen is displayed for each band.
Continuing to press the key will display the input source screens for Bluetooth and Auxil-
iary as described in the section “Input Source Screens” on page 5.
TUNER SOURCE SCREENS
AM/FM
An example of a typical tuner input source screen is shown in Figure 2 below.
SOURCE NAME
SELECTED
FREQUENCY
TUNING MODE
Figure 2 - Example source screen (AM input selected)
TUNING METHODS
You can use three methods to tune the overhead unit: automatic, manual and preset.
Rotary knob
Menu key
Play/Pause
Forward
Backward
To tune to a required frequency, channel or preset:
Press the Play/Pause key to step through the available tuning methods for each band.
Tuning Method
When tuning with this method...
Auto
Manual
Preset
•
Press the Forward or Backward key to start searching for
available stations.
Note: The search stops when a station is found or when the
unit has scanned all available frequencies once.
•
Press the Forward or Backward key to step through the
range of frequencies one at a time.
•
Press the Forward or Backward key to step through available
presets (only available if there are two or more presets)
•
To tune to a specific preset:
a. Press the Menu key.
b. Press the rotary knob to select Presets.
c. Turn the rotary knob to hightlight the required preset.
d. Press the rotary knob to tune to the highlighted preset.
e. Menu exit. See “Menu Key Operation”
For further details, see “Adding and Removing Presets.”
