background image

NRX-5

-

Display Feature Phone

8

2.6 Caller ID

To make use of these features, you must first subscribe to Caller ID Service.

2.6.1 99 Caller ID records

When you use this telephone with the Caller ID service, the NRX-5 enables you
to see the number of the calling party (unless the call is blocked or is from a
silent number) when the phone rings. Up to 99 most recent received calls'
records, together with their time and the date information, are stored. Each call
is numbered in the call history,

2.6.2 New call notification

When a new call is received, the time, date and calling number of this call will
be displayed between the first and second ring.

The 

NEW CALL

LED will flash when the phone has received a new CLID. It will

continue to flash until all new call information in the call history has been
reviewed.

2.6.3 New call review

To review the new calls:
1. Press menu scroll buttons to review the new calls
2. When all new calls have been reviewed, the NEW CALL LED will stop flashing
and switched off.

2.6.4 Caller ID record summary

The display will show the Caller ID's record summary as TOTAL:XX, where XX
is the total number of calls stored in the memory.
The display also show the number of new calls received as NEW:YY, where YY
is the number of new calls.

2.6.5 Call review

To review all the calls in the CLID call log, use the menu scroll buttons buttons.
.

9021NRX5.qxd  8/12/2003  2:04 PM  Page 8

Summary of Contents for NRX-5













Reviews: