background image

1

Recycling

This symbol means that your appliance must not be thrown into a normal bin. It will be selecti vely collected for the purpose of 

reuse, recycling or transformati on. If it contains any substances that may be harmful to the environment, these will be eliminated 

or neutralised.

Contact your retailer for recycling informati on.

 WARNINGS

GENERAL WARNINGS

• 

Failure to respect the warnings may cause serious damage to the pool equipment or cause serious injury, even death.

• 

Only a person qualifi ed in the technical fi elds concerned (electricity, hydraulics or refrigerati on) is authorised to perform any 

servicing  or  repairs  to  the  appliance.  The  qualifi ed  technician  working  on  the  appliance  must  use/wear  personal  protecti ve 

equipment (such as safety goggles and protecti ve gloves, etc.) in order to reduce the risk of injury occurring when working on 

the appliance.  

• 

Before handling the appliance, check that power is switched off  and isolated from the power supply.

• 

The appliance is intended to be used for pools and spas for a specifi c purpose; it must not be used for any purpose other than 

that for which it was designed.

• 

This  appliance  is  not  intended  for  use  by  persons  (including  children)  having  a  physical,  sensory  or  mental  disability,  or  by 

persons lacking experience or knowledge of the appliance, unless they are fi rst instructed or are supervised during the use of the 

appliance by a person responsible for their safety.

• 

Keep the appliance out of the reach of children.

• 

The appliance must be installed according to the manufacturer’s instructi ons and in compliance with local and nati onal standards. 

The  installer  is  responsible  for  installing  the  appliance  and  for  compliance  with  nati onal  installati on  regulati ons.  Under  no 

circumstances may the manufacturer be held liable in the event of failure to comply with applicable local installati on standards.

• 

For any work other than the simple user maintenance described in this manual, the product should be referred to a qualifi ed 

professional.

• 

Incorrect installati on and/or use may cause serious damage to property or serious injuries (possibly causing death). 

• 

All equipment, even postage and packing paid, travels at the risks and perils of the recipient. The latt er shall issue reserves in 

writi ng on the carrier's delivery slip if damage is detected, caused during transport (confi rmati on to be sent to the carrier within 

48 hours by registered lett er). In the event that an appliance containing coolant has been turned on its side, menti on your 

reservati ons in writi ng to the carrier.

• 

If the appliance suff ers a malfuncti on, do not try to repair it yourself; instead contact a qualifi ed technician.

• 

Refer to the warranty conditi ons for details of the permitt ed water balance values for operati ng the appliance.

• 

Deacti vati ng, eliminati ng or by-passing any of the safety mechanisms integrated into the appliance shall automati cally void the 

warranty, in additi on to the use of spare parts manufactured by unauthorised third-party manufacturers.

• 

Do not spray insecti cide or any other chemical (infl ammable or non-infl ammable) in the directi on of the appliance, as this may 

damage the body and cause a fi re.

• 

Zodiac® heat pump, fi lter pump and fi lter appliances are compati ble with the most commonly used types of pool water treatment 

systems.

• 

Do not touch the fan or moving parts and do not place objects or your fi ngers in the vicinity of the moving parts when the 

appliance is in operati on. Moving parts can cause serious injury or even death.

SPECIFIC FEATURES APPLICABLE TO "Pool cleaners"

• 

The cleaner must operate in pool water at a temperature of between 15°C and 35°C.

• 

To avoid possible injury or damage to the cleaner, do not operate the cleaner out of the water.

• 

In order to prevent possible injury, bathing is prohibited when your cleaner is in the pool.

• 

Do not use the cleaner during shock chlorinati on.

• 

Do not leave the cleaner unatt ended for an extended period.

WARNING ON THE USE OF A CLEANER IN A POOL WITH A VINYL SURFACE: 

• 

Before installing your new cleaner, carefully inspect the lining of your pool. If the liner has eroded in some areas, or if you 

noti ce gravel, folds, roots or corrosion caused by metal beneath the liner, or if you noti ce that the surface (bott om and walls) is 

damaged, do not install the cleaner before performing the necessary repairs or before having the liner replaced by a qualifi ed 

professional. The manufacturer may not be held liable in any way for damage caused to the liner.

• 

The surface of certain vinyl patt erned surfaces can wear rapidly and the patt erns disappear on contact from objects such as 

cleaning brushes, toys, infl atable buoys, chlorine distributors and automati c pool cleaners. The decorati on on some vinyl surfaces 

can be scratched or worn by basic fricti on such as through the use of a pool brush. The colours of certain patt erns can also be 

erased during use or when in contact with objects in the pool. The manufacturer may not be held liable for the erased patt erns, 

wear or scratching of vinyl surfaces, which are not covered by the limited warranty.

Summary of Contents for P280



















Reviews: