FEATURES AND CONTROLS
SWITCHES / BUTTONS
LIGHT SWITCH
Use the headlight switch
q
to turn the lights on and off and to change the lights
from high beam to low beam. The key must be in the ON position to operate the
headlights.
ENGINE STOP SWITCH
Before starting the engine, press the upper end of the switch
w
down to the ON
position. To stop the engine, press the lower end of the switch down to the OFF
position. The engine will not start or run when the switch is off.
MAIN KEY SWITCH
Turn the main key switch
e
clockwise to the ON position before starting the
engine. Turn the main switch off to stop the engine and end all electrical power
to the vehicle.
START BUTTON
To start the engine, make sure the stop switch is in the ON position. Turn the
main key switch on. Press the start button
r
.
OVERRIDE SWITCH (REVERSE SPEED LIMITER)
This vehicle is equipped with a reverse speed limiter system. To gain additional
wheel speed while backing, release the throttle and depress the override switch
t
.
WARNING
Pressing the override button while the throttle is open can cause loss of
control, which may result in serious injury or death. Always release the throttle
before pressing the override button.
27
FEATURES AND CONTROLS
Summary of Contents for Phoenix 200
