82
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Transmission Oil Changing Procedure
1. Position the vehicle on a level surface.
2. Remove the four screws on the footwell and gently pull outward
for access.
3. Remove the transmission fill plug.
4. Place a drain pan under the bottom right-hand side of the
transmission. Remove the transmission drain plug and drain the
oil. Discard the used oil properly.
5. Clean and reinstall the drain plug. Torque to 14 ft. lbs. (19 Nm).
6. Add Polaris Premium Synthetic Gearcase Lubricant (see page 115)
until oil reaches the bottom of the filler hole.
7. Reinstall the fill plug and check for leaks.
8. Reinstall the footwell.
Front Gearcase Lubrication
The front gearcase lubricant level should
be checked every six months or 1000
miles (1600 km), whichever comes first.
Front gearcase oil should be changed
annually.
1. Place the vehicle on a level
surface and remove the fill plug
(1).
2. View the oil level and add oil if
needed. Oil should be kept at
the bottom of the fill plug thread. Use
Premium Front Gearcase Fluid (see page 115).
Gearcase Oil Changing Procedure
1. Place the vehicle on a level surface and remove the fill plug (1).
2. Place a drain pan beneath the gearcase, remove the gearcase drain
plug (2), and drain the oil.
3. Clean and reinstall the drain plug. Torque to 14 ft. lbs. (19 Nm).
4. Add 400 ml (13.5 oz.) of Premium Front Gearcase Fluid (see page
115).
5. Reinstall the fill plug and check for leaks.
1
2
