background image

141

MAINTENANCE

Cleaning and Storage

Storage Tips

Inspect and Lubricate

Inspect all cables and lubricate all areas of the vehicle as recommended 

in the Periodic Maintenance Chart beginning on page 96. 

Battery Maintenance 

Remove the battery and recharge it as outlined on page 135. Store the 

battery in a cool, dry place.

Storage Area/Covers

Set the tire pressure and safely support the vehicle with the tires slightly 

off the ground. Be sure the storage area is well ventilated. Cover the 

vehicle with a genuine POLARIS cover. Do not use plastic or coated 

materials. They do not allow enough ventilation to prevent 

condensation, and may promote corrosion and oxidation.

Accessories

Auxiliary power outlets provide 12-volt power for operating 

accessories. Accessory outlets are available for all models. POLARIS 

also has a wide range of additional accessories available for your 

vehicle. Always install accessories that are approved by POLARIS for 

use on this vehicle.

Summary of Contents for Sportsman XP 1000








































































































































































Reviews: