Instr 9927953
Rev 01 2017-07
Page 6 of 8
b. Remove the standard rear auger strap plate
H
and install the optional LH rear strap plate
u
as shown. Torque fasteners to specification
provided.
TORQUE
18 Ft. Lbs. (24.5 Nm)
c. Reinstall the strap
L
and latch mechanism
M
onto the LH rear auger strap plate. Torque
fasteners to specification provided.
TORQUE
7 Ft. Lbs. (9.5 Nm)
12. After confirming the correct rear auger plate is
installed you may need to adjust the front auger
carrier powerhead support
N
to prevent the
powerhead from rotating while in transit. To do so,
loosen the front auger strap plate locking nuts
K
and adjust the powerhead support until it makes
contact with the powerhead. Re-torque fasteners
to specification provided.
TORQUE
18 Ft. Lbs. (24.5 Nm)
13. Ensure all tools are accounted for and all steps
have been completed.
