9
Steering Wheel Controls
Installation
Steering wheel controls should work for all non CAN bus vehicles provided that Key 1,
Key 2 and steering wheel ground have been hardwired in properly according to your
specific vehicle.
Some CAN bus vehicles will work with a specific module, please call Polaris to see if we
have a solution for your vehicle.
Programming in your steering wheel controls
Select Wheel Key study from the main menu
Select and press one of your steering wheel controls.
Once you have selected one of your steering wheel controls, the following screen will
appear:
You can select a different function for short click and long click.
For example, if I have selected my mode button, I can select the mode function as my short
click and then I can choose the ‘ok google’ function for my long click. When I hold down my
mode button, ‘ok google’ will appear.
Once you have your desired settings, press ok in the top right hand corner. You will then be
taken back to the SWC Home screen. Select the next steering wheel control that you wish
to programme in and follow the same procedure.
Keep repeating the same procedure to programme each individual SWC setting.
